Šipka INQUIRY

UNDERLAYS FOR FLOORS

Aluminium/vapour barrier underlay pack/30m2
Foam floor mat with an integrated aluminium foil against moisture penetration. Suitable for underfloor heating!

 

 

 

Isoboard 5,5x590x860mm
Isoboard is installed under floating floors on a hard and dry surface. The pad aligns the ground's slight unevenness, muffles the walking sounds, and makes the floor warmer. Available in th. 5 and 7 mm

Washer installation
We recommend acclimatizing the base in the room where the floor will be laid 24 hours before the actual laying to balance the room's humidity and temperature parameters. Boards are placed on a scythe. Leave a 5-10mm expansion joint between the boards and the walls. You can use the pad pieces to create an expansion joint and remove them later after laying the entire joint floor areas. In the case of a substrate made of concrete, cement screed or anhydride, the pads are applied on a PVC foil th. 0.2mm with overlap. Leave 1-2mm joints between the board's washers. To secure, you can also attach the pad locally with glue or with staples or nails. The washer is laid in the direction so that the angle between the floor joints and the washer plates formed 45 °. The reason is that the joints between the base plates and the floor overlap. The final floor covering is laid directly on the base.

Isoboard 7x590x850mm
Isoboard is installed under floating floors on a hard and dry surface. The pad aligns the ground's slight unevenness, muffles the walking sounds, and makes the floor warmer. Available in th. 5 and 7 mm

WASHER INSTALLATION
We recommend acclimatizing the base in the room where the floor will be laid 24 hours before the actual laying to balance the room's humidity and temperature parameters. Boards are placed on a scythe. Leave a 5-10mm expansion joint between the boards and the walls. You can use the pad pieces to create an expansion joint and remove them later after laying the entire joint floor areas. In the case of a substrate made of concrete, cement screed or anhydride, the pads are applied on a PVC foil th. 0.2mm with overlap. Leave 1-2mm joints between the board's washers. To secure, you can also attach the pad locally with glue or with staples or nails. The washer is laid in the direction so that the angle between the floor joints and the washer plates formed 45 °. The reason is that the joints between the base plates and the floor overlap. The final floor covering is laid directly on the base.

Silent-step+foil 3mm/55m2
Foam underlay for floors with integrated PE foil against moisture penetration.

Foam underlay for floors with integrated PE foil against moisture penetration.
Particleboards have, in addition to water resistance, other excellent mechanical and physical properties. They are thus suitable for versatile applications, such as laying floating floors, insulation boards, or wall tiles. Particleboard is simply a high-quality and proven construction element in the interior.

 


COMPANY PREMISES