INQUIRY
The solvent-free dispersion primer has a very low content of emissions and pollutants for high adhesion. It is suitable for absorbent substrates for direct gluing of parquet with all SMP parquet adhesives from the Bakit series and subsequent troweling with Servoplan, Servofix Servoalpha trowels. When laying parquet, use suitable Kiesel leveling compounds. The product is not ideal for non-absorbent substrates, bituminous adhesives or residues of water-soluble adhesives (eg sulphite lye). Bakit PV-Universal cannot be used as a moisture barrier or screed reinforcement.
Solvent-free penetration, for the preparation of absorbent and non-absorbent substrates, also on old, solid, insoluble residues of old adhesives.
Not suitable for water-soluble adhesives based on sulfur lyes and bituminous adhesives.
Solvent-free hygienic pre-coat (according to TRGS 610). It has a very low content of emissions and pollutants. The pre-coat ensures high adhesion of other layers to the substrate. It is designed for the initial treatment of absorbent and non-absorbent substrates.
The pre-coat can be used on old, load-bearing, water-resistant residues of old adhesives.
Not suitable for water-soluble adhesives based on sulfur lyes and bituminous adhesives.
Okatmos® EG 20 contributes to the elimination of odors, thanks to its hygienic effects.
Universal cement-based screed with the addition of polymers with low internal stress is suitable for contact screeds and leveling of substrates on concrete ceiling slabs, screeds, terraces, tiles and floor slabs with a screed layer thickness of 3 - 20 mm . It is used indoors. In conjunction with contact insulation, it is also suitable for rooms with moisture stress class A0. After adding Okamul 71, Servofix F 210 is ideal for cast asphalt substrates of hardness class IC 10 and overcoating heating mats.
The trowel is suitable as a base for gluing all types of floor coverings and paint or coating as a walking layer for everyday stress. When laying dense floor coverings, the substructure must be permanently dry.
Cement-based screed with the addition of polymers for universal use is spilled very well. It is designed for troweling and leveling substrates ready for laying floor coverings with a trowel layer thickness of up to 10 mm (setting with silica sand up to 20 mm). The screed is suitable for screeds made of cast asphalt of hardness class IC 10. In this case, the maximum thickness of the screed layer is 5 mm.
ServoMulti S110 is suitable as a base for ceramic coverings, natural stone and concrete paving, for elastic and textile floor coverings.
ServoMulti S110 cannot be used as a final walkable floor layer and cannot be used in humid environments.
Mortar based on fine cement with low internal stress with polymers' addition is suitable for producing leveling layers on monolithic reinforced concrete slabs, screeds, terraces, tiles and slab floor coverings. It is used indoors. The thickness of the layer can be 3 - 40 mm. When used in rooms with moisture stress class A0, it is used in combination with contact insulation. After adding the Okamul 71 product, the Servoplan D 800 is also suitable for cast asphalts of hardness class IC 10 and overcoating heating mesh mats.
Servoplan D 800 is suitable as a base for laying any floor covering. In combination with paint or coating, it can also be used as a final tread layer of floors under everyday stress.
When laying vapor-tight floor coverings, the layers of the substructure must be permanently dry.
The fast-drying, self-leveling cement-based leveling compound with the addition of polymers is suitable for leveling and leveling substrates up to a layer thickness of 30 mm.
Servoplan P 200 is suitable as a base for ceramic floor coverings, natural stone and concrete paving, as well as for elastic and textile floor coverings and parquets. The trowel is suitable for a dry indoor environment on stable substructures that do not sag. In combination with contact insulation, the screed can also be used in environments with water effect classes W0-I, W1-I and W2-I according to DIN 18534 in residential and hotel bathrooms, but not directly in shower areas. Furthermore, with a layer thickness of up to 10 mm, the screed is also suitable for screeds made of cast asphalt of hardness class IC 10 and overcoating heating mats. Servoplan P 200 can also be used as a walkable floor layer in housing construction. Kiesel-Armierungsfasern reinforcement fibers can be added to the trowel to increase the tensile and flexural strength.
Cement-based repair compound with polymers' addition is suitable for leveling stair treads, landings, holes and larger irregularities in cement screeds, a concrete ceiling, and foundation slabs at any filling layer thickness. Do not use the Servoplan R 300 S as the final floor tread.
For surface troweling with a layer thickness of more than 5 mm, Servoplan R 300 S must be set with silica sand.
Fast-curing fiber-based screed reinforced with fibers with the addition of high-quality polymers is intended for troweling and leveling substrates up to a thickness of the screed layer of 15 mm. Servoplan 444 is quick-drying, highly flexible, has low internal stress and spills very well. From a minimum thickness of 3 mm, it is suitable for parquet. On mineral substrates such as concrete, cement or anhydrite screed, from a minimum thickness of 5 mm in combination with epoxy primer, Okapox GF is suitable for the final tread layers of floors stressed by the movement of pallet trucks. The trowel is ideal for a dry indoor environment on load-bearing, stable substructures that do not sag. In combination with contact insulation, the screed can also be used in environments with water effect classes W0-I, W1-I and W2-I according to DIN 18534 in residential and hotel bathrooms, but not directly in the shower area
. Servoplan 444 can also be used on cast asphalt of hardness class IC 10 for overcoating Okaphone insulation boards and underfloor heating mats.
