Terrace clamp - invisible connection of terrace boards

Terasová úchytkaThe terrace clamp prevents the stainless steel screws from shearing off through the gap between the base structure and the terrace board (10 mm), especially when using hardwood / tropical wood (see page 21). However, unlike the Dista-skirting, the planks are attached indirectly, i.e. no screw heads are visible on the terrace surface.

 

Drilling template for invisible attachment of patio boards

The Drill Tool 50X is a drilling template for invisible attachment of decking boards. With this tool, decking boards can only be attached indirectly / invisibly. Thus no screw heads are visible on the surface of the terrace. The screws are evenly screwed in at an angle of 50° using predetermined fixing points and are thus optimally positioned. Thanks to the spacing mandrels on the Drill Tool 50X, an even joint distance of 6mm between the individual planks is automatically guaranteed.

 

 

T-Stick - invisible connection of terrace boards

T-Stick

The T-Stick is inserted between two wooden planks and attached in the groove of the plank with a steel plate. This creates a visually pleasing wooden surface with no visible screw heads. The spacing of the planks is automatically maintained by the T-Stick. A distance of approx. 9 mm from the bottom structure allows good ventilation, thus no permanent moisture is formed. Durability is positively affected.

 

 

Accessories - aids for laying terrace boards

Tx-bitHere it would need some introductory text in the accessories. Here it would need some introductory text in the accessories. Here it would need some introductory text in the accessories. Here it would need some introductory text in the accessories. Here it would want some introductory text in the accessories.

 

COMPANY PREMISES